Parking Lot Lighting
Pole light installation, repair, and LED retrofits, including the controls and the underground feeding them, all under one contractor.
The fixture, the controls, and the wire underneath
Parking lot lighting is really two problems: the electrical work, and getting a licensed electrician thirty feet in the air. Plenty of contractors handle the first and hand off the second, which is why a dark pole often takes weeks to sort out. Robb's Electric handles pole lighting end to end, from the aerial access through the fixture, the controls, and the underground circuit feeding it.
We install new poles and bases, replace fixtures and heads, retrofit older metal halide and high-pressure sodium lighting to LED, repair photocells, contactors, and time clocks, and locate and fix the underground feeds that fail between poles. When lights are out in a pattern rather than one at a time, the fault is usually in the circuit or the controls rather than in a fixture, and finding that correctly is where most of the money gets saved.
Who this is for
Property managers, business owners, retail and industrial sites, associations, churches, and municipalities with parking areas, drive lanes, and walkways to keep lit. A dark lot is a liability and a tenant complaint, and lighting is one of the few building systems where the repair and the efficiency upgrade are usually the same project.
We work on lighting we did not install, which is most of it. If you inherited a site with no drawings, mismatched fixtures, and a lighting panel nobody has labeled since the 1990s, that is a completely normal starting point for us.
What's included
Fixtures, poles, controls, and the underground between them, all under one contract.
Pole light installation
New poles, bases, and fixtures for new lots and expansions, placed so coverage is even instead of patchy and dark between poles.
Repair and troubleshooting
Dark or cycling lights traced to the actual cause: fixture, driver, photocell, contactor, time clock, breaker, or a faulted underground run.
LED retrofits
Metal halide and high-pressure sodium fixtures converted to LED, which cuts energy and maintenance and usually improves how the lot actually looks at night.
Lighting controls
Photocells, contactors, time clocks, and lighting panels replaced or reconfigured so the lot turns on and off when it is supposed to.
Underground feeds
Faulted circuits located and repaired, and new feeds trenched or directionally bored out to added poles.
Aerial access
Pole and fixture work performed at height by licensed electricians, so the diagnosis and the repair happen on the same visit.
Why Robb's for parking lot lighting
Most contractors can change a fixture. Far fewer can get to it, find the fault, and fix the underground feeding it.
- Free estimates, so getting a real number on a dark lot costs nothing.
- We locate and repair faulted underground circuits ourselves, which is where most site lighting failures actually live.
- Repair and LED retrofit get quoted together, so you can see whether fixing or upgrading is the better spend.
- One contractor for the lighting, the controls, the underground, and the panel feeding all of it.
- A one-year warranty on labor and materials, the same as every other job we do.
FAQ
Parking Lot Lighting questions
Still have a question? Call us at (952) 448-4030 and we'll walk you through it.
Usually not. When lights fail in groups or along one leg of a lot, the cause is normally upstream: a contactor, a photocell, a time clock, a breaker, or a faulted underground run. Individual failures scattered randomly around a lot point at fixtures or drivers instead. We start by determining which situation you have, because replacing fixtures on a circuit fault just gets you dark lights again.
A single fixture or photocell replacement is a modest and fairly predictable job. Locating a fault in an underground run, replacing a pole, or retrofitting an entire lot to LED are different orders of magnitude. The site assessment and the estimate are free: we tell you what is actually wrong, then price the repair against the retrofit so you can decide with both numbers in hand.
For most sites still running metal halide or high-pressure sodium, yes, on two counts. Energy use typically drops substantially, and maintenance drops further because you stop replacing lamps and ballasts from a lift every couple of years. Utility rebate programs are often available for commercial lighting retrofits, and we will tell you what your site may qualify for rather than promising a number we cannot control.
Yes. Pole and fixture work at height is part of the service, performed by licensed electricians rather than handed to a separate crew. That is what lets the diagnosis and the repair happen on the same visit instead of turning into two scheduled trips.
Yes. We trench or directionally bore the new feed, set the bases and poles, and tie it into the site's lighting panel and controls. Doing the underground and the lighting with one contractor removes the coordination gap where these projects usually stall.
Request service
Let's get your project done right.
Tell us what you need and someone from Robb's Electric will follow up. Prefer to talk it through? Call the office. Estimates are free either way.
- Free estimates on every job
- Licensed, bonded & insured · EA001548
- Serving the Twin Cities metro since 1964
Request service
We'll get back to you fast. No obligation.
Form not loading? Open it in a new tab or call (952) 448-4030.
- Free estimates, priced before any work starts
- One-year warranty on labor and materials